For the best protection against fire and burglary, a Winchester rifle safely forward. This year, Winchester 20-year anniversary, and that certainly deserves the traditional diamond has done it all. Winchester UL has developed the weapon with his fist easily cut single laser door. They started in Fort Worth, Texas, and are still there. Winchester built on innovation, quality and service and have built a strong tradition that remains committed tofar.
2010 was a great year for Winchester. Continue on one of the highest rated companies for safety, even the most extreme attack of theft and fire. This year they have even higher resistance to fire and UL burglary ratings put on all their models under the Container Security Residential Code.
You also have the new Supreme series, available in two sizes introduced. These ports include composite steel plates 1 / 4 inch and 2-hour fire resistance. UL FireResistance testing is a rigorous process. Tests can try a test of resistance to fire, a fire and the effects of an explosive test, and testing of an explosion and the combined impact. The evaluation of the product is received by his performance in these tests.
Acts and documents are just some of the most common elements in safes for protection against fire and burglary pending. These documents often contain paper documents, microfilm, CDs, DVDs and original documents. Since these elements have differentUL tests reveal heat reactions for three different temperatures and five different periods of time. The temperature in the UL label is the maximum temperature of objects in the safe, were exposed during the test. The time on the label how long the safe has been tested to withstand exposure to high temperatures and still be able to maintain an acceptable temperature inside. The length of time varies from 1 / 2 hour to 4 hours. These times do not indicate the total time of testing.
Afterthe time required and the temperature has been reached, the test furnace is off and cool the test product. During this period, the company close to 70 hours, the test product, continues to absorb the heat and the internal temperature may rise much more. To receive the UL mark must remain below 125% humidity degrees/80 products throughout the process of heating and cooling. If the cooling is finished, and the products are tested andjudged by the ease of use.
The test of fire and the impact is conducted after a product has stood the test of fire. It is heated to a certain temperature for a specified duration, then removed and dropped from a height of nine feet into a pile of broken bricks, equal to the pressure of a fall from a building on the third floor. After the impact the product for signs of rupture, splitting or opening is then examined the interior. After the impact, and cooling, the productheated and re-tested.
The test explosion is for all the products you need to create premium UL. In this test, the product is placed in a furnace at 2000 degrees centigrade for 30 minutes. If there is no explosion, the product is then allowed to cool in the oven. After cooling, it is examined for heat or moisture damage to interior finishes, insulation, or internal security and locks. If there was an explosion, good, offering non-UL.
Winchester Safes areMost of these tests. 2 hours fire resistance means that Winchester is heated to 1850 degrees Celsius, keeping the inside of the product. All safes Winchester with a lifetime warranty against fire and theft occur, and delivered all the locks with a one-year warranty, and a 9-year guarantee is for a nominal fee.
0 comments:
Post a Comment